ACTUATOR/CONTROLLER - Pro-AIT

Go to content
ACTUATORS / CONTROLLERS

DIMMING ACTUATORS
6CH 5A Intelligent LED Dimming Actuator
HDL-MDLED0605.432
6CH 5A Intelligent LED Dimming Actuator can be used to control the LED light which has constant voltage.
6CH 5A Intelligent LED Dimming Actuator
SPECS

Up to 6 separate zones, up to 12 scenes in each zone

4 running modes: “forward”, “backward”, “forward and backward”, “random”

Low, high, max threshold for each channel, applicable for different load

Bypass button for manual control is available for each channel

Supports easy programming

Supports HDL Buspro online upgrading
It has 6 output channels, each channel has a bypass button for manual control. Scene and sequence functions are available.

4 x 1.5A Universal Dimmer (Trailing and Leading Edge)
HDL-MDT04015.433
Dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads.
Universal Dimmer
SPECS

Different load Types

Both leading and trailing edge modes are available.

Selectable Dimming Curves

To prevent damage to the system and unit a variety of protective features are included.

Scene Recovery

Manual control
With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

2 x 3A Universal Dimmer (Trailing and Leading Edge)
HDL-MDT0203.433
Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.
2 x 3A Universal Dimmer
SPECS

Selectable Dimming Curves

To prevent damage to the system and unit a variety of protective features are included

Scene Recovery

Manual control
With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

Leading Edge TRIAC 6CH 2A Dimmer
HDL-MD0602.432
Supports leading edge TRIAC dimming, and has four selectable dimming curves. Both inductive and resistive loads can be controlled, as can capacitive loads like LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Immediate controlling is possible via six on-board manual buttons.
Leading Edge TRIAC 6CH 2A Dimmer
SPECS

Leading edge dimming

Able to support incandescent lights, halogen lights, and dimmable LED lights

Selectable Dimming Curves

Fuse

Scene Recovery
With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to switch the dimming controller on & off.

Leading Edge TRIAC 4CH 3A
HDL-MD0403.432
Both inductive and resistive loads can be controlled, as can capacitive loads like LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Immediate controlling is possible via four on-board manual buttons.
Leading Edge TRIAC 4CH 3A Dimmer
SPECS



Leading Edge TRIAC 2CH 6A
HDL-MD0206.432
Four selectable dimming curves, both inductive and resistive loads can be controlled, as can capacitive loads like LED drivers, and electronic ballasts which use leading edge TRIAC dimming.
Leading Edge TRIAC 2CH 6A Dimmer
SPECS

Different load Types

Selectable Dimming Curves

Fuse

Scene Recovery

Manual Control
With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Leading Edge 6 x 10A
HDL-MDH0610
high performance 6 channel TRIAC dimmer, capable of supplying 10A per channel.The module is able to act as a scene controller, and control lights that demand a high current.
Leading Edge 6 x 10A
SPECS

High performance TRIAC dimmer

Different load types

LED status indication

Scene Recover
Resistive loads, inductive loads, LED drivers, and electronic ballasts which utilize leading edge TRIAC dimming are supported.

Leading Edge 6 x 20A
HDL-MDH0620
High performance 6 channel TRIAC dimmer, capable of supplying 20A per channel.The module is able to act as a scene controller, and control lights that demand a high current.
Leading Edge 6 x 20A
SPECS

High performance TRIAC dimmer

Different load types

LED status indication

Scene Recovery
With 6 available channels and a maximum current output per channel of 20A, this high performance dimmer can meet a variety of load demands.
Each channel can have low, high, and maximum thresholds with a 10 bit dimming accuracy.

Leading Edge 12 x 10A
HDL-MDH1210
High performance 12 channel TRIAC dimmer, capable of supplying 10A per channel. The module is able to act as a scene controller, and control lights that demand a high current.
Leading Edge 12 x 10A
SPECS

High performance TRIAC dimmer

Different load types

LED status indication

Scene Recovery
The status of the CPU is shown via three triple phase LED indicators.
These indicators are able to show the power status of phases A, B, and C. The channel output signal status is also represented, by 12 LED indicators.

DMX CONTROLLERS
512CH DMX Scene Controller
HDL-MD512-DMX.232
DMX show controller that supports DMX512, Art Net, and HDL Net protocols.
It is designed to control RGB LED strips, RGB lights, and other DMX devices using 512 channels, with 16 areas and 1024 scenes in each area.
512CH DMX
SPECS

Supports Art net / HDL Net DMX protocol

Each channel has light protection delay time

Each channel has protection delay time for power on after power off

Soft reset supported

Gateway: data exchange between HDL Buspro and Ethernet
With a dedicated onboard LCD a user is able to instantly read the status of the DMX 521CH Scene Controller.
This enables faster configuration, installation, and minimizes time taken while troubleshooting.

48CH DMX Scene Controller
HDL-MC48IP-DMX.431
With 48 areas and 99 scenes in each area, the controller is designed to control RGB LED strips, RGB lights, and other DMX devices using 48 channels.
48CH DMX
SPECS

48-channel, up to 48 separate areas

Art net / HDL Net DMX protocol supported

0-99 scenes

Gateway between HDL Buspro and Ethernet
Up to 99 sequences supported, 4 running modes (backward, forward & backward, random) available for each sequence.

650 mA DMX LED-driver
dedicated LED driver, which uses a DMX512 interface. The module uses pulse wave modulation to supply a constant voltage to color changing LED strips, and requires DC 10-30V to operate.
650 mA DMX LED-driver
SPECS

PWM output

Buffering

Operational indicator

DMX address setting and terminal
Three DMX terminals are present on the front of the unit, they allow the input of data+, data-, and com.
The DMX output signal can also be buffered to another LED driver if required.

Back to content