ACTUATORS/CONTROLLERS_KNX - Pro-AIT

Go to content
ACTUATORS / CONTROLLERS

KNX 2CH 3A Universal Dimming Actuator
HDL-M/D02.1
KNX Universal Dimming Actuator has 3 types of output ircuits, which supports multiple control types.
KNX 2CH 3A Universal Dimming Actuator
SPECS

3 types of output circuits: 2, 4 and 6 channels of dimming actuator

Supports leading edge mode and trailing edge mode

Parallel channels may form large current output, and its configuration should be consistent

Manual control: Manual operation for each channel
This series of dimming actuators are in full compliance with European Safety Standards and KNX standard protocol.

KNX 4CH 1.5A Universal Dimming Actuator
HDL-M/D04.1
KNX Universal Dimming Actuator has 3 types of output circuits, which supports multiple control types.
KNX 4CH 1.5A Universal Dimming Actuator
SPECS

3 types of output circuits: 2, 4 and 6 channels of dimming actuator

Supports leading edge mode and trailing edge mode

Parallel channels may form large current output, and its configuration should be consistent

Manual control: Manual operation for each channel
This series of dimming actuators are in full compliance with European Safety Standards and KNX standard protocol.

KNX 6CH 1A Universal Dimming Actuator
HDL-M/D06.1
KNX Universal Dimming Actuator has 3 types of output circuits, which supports multiple control types.
KNX 6CH 1A Universal Dimming Actuator
SPECS

3 types of output circuits: 2, 4 and 6 channels of dimming actuator

Supports leading edge mode and trailing edge mode

Parallel channels may form large current output, and its configuration should be consistent

Manual control: Manual operation for each channel
This series of dimming actuators are in full compliance with European Safety Standards and KNX standard protocol.

KNX Ballast 6CH 10A Dimmer
HDL-M/DA06.10.1
Ballast dimming and relay output unit, which is capable of controlling multiple load types via its 6 output channels.
KNX Ballast 6CH 10A Dimmer
SPECS

Dual outputs

Load types

Staircase lighting

Scene Recovery
The module comes with a dedicated manual control feature, making instant system manipulation possible.

KNX DALI Module
HDL-M/DALI.1-B
KNX DALI Dimming controller which supports communication between the HDL KNX BUS and the DALI BUS system.
KNX DALI Module
SPECS

Fault detection

Dual dimming curves

Multiple control targets

Customizable run time
The module is capable of managing 64 DALI devices, and supports DALI fault detection, lamp fault detection, and ballast fault detection.

DMX Recorder
HDL-M/DMX512.1
As a DMX recorder the module has the ability to record scenes from DMX resources, and then play the scene back enabling the control of various DMX devices,
such as moving head lighting, and LED lighting etc.
DMX Recorder
SPECS

Multi-functional controller

Ability to record scenes for 4 hours

Multi operational support

DMX input and output controlling
This unit can automatically record, play, or delete files, and has single play or repeat play modes.

KNX 4CH 7A RGBW Driver
HDL-M/DRGBW4.1
KNX 4CH 7A RGBW Driver has 4 RGBW driving channels, each channel has the output capacity of 7A.
KNX 4CH 7A RGBW Driver
SPECS

PWM liner dimming

Dimming lower / upper limit setting

Dimming fade time setting

1 bit switch state response

1 byte brightness state response

State recovery after power on

Staircase light

Flashing light

Scene function (10 scenes supported for each channel)

Logic function
T
hreshold value
The four channels can be controlled separately or using RGBW combination control.
The dimming is stable and diversified to meet the needs of different occasions.

KNX 4CH 10A High Power Switch Actuator
HDL-M/R4.10.1
KNX 10A High Power Switch Actuator includes 3 types (4CH, 8CH, and 12CH) of output circuits, and each channel outputs 10A current.
KNX 4CH 10A High Power Switch Actuator
SPECS

Maximum output current of each channel:10A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output
With characteristics of long life, low power consumption and fast execution speed,
this series of actuators are in full compliance with European KNX safety standards and protocols of high-power switching.

KNX 4CH 16A High Power Switch Actuator
HDL-M/R4.16.1
KNX 16A High Power Switch Actuator adopts 50A magnetic latching relay, which has three types of output circuits, and each channel outputs 16A current.
KNX 4CH 16A High Power Switch Actuator
SPECS

16A High Power Switch Actuator includes 3 types

Maximum output current of each channel: 16A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output
This series of High Power Actuators have the characteristics of long life, low power consumption and fast execution speed.

KNX 4CH 16A High Power Switch Actuator
With Current Detection
HDL-M/R4.16.1-CD
KNX 16A High Power Switch Actuator with Current Detection adopts 50A magnetic latching relay, which has three types of output circuits, and each channel outputs 16A current.
KNX 4CH 16A High Power Switch Actuator
SPECS

16A High Power Switch Actuators with Current Detection include 3 types

Maximum output current of each channel: 16A

Control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output

Current detection functions
This series of High Power Actuators have the characteristics of long life, low power consumption and fast execution speed.

KNX 8CH 10A High Power Switch Actuator
HDL-M/R8.10.1
KNX 10A High Power Switch Actuator includes 3 types of output circuits, and each channel outputs 10A current.
KNX 8CH 10A High Power Switch Actuator
SPECS

10A High Power Switch Actuators include 3 types

Maximum output current of each channel: 10A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output
With characteristics of long life, low power consumption and fast execution speed,
this series of actuators are in full compliance with European KNX safety standards and protocols of high-power switching.

KNX 8CH 16A High Power Switch Actuator
HDL-M/R8.16.1
KNX 16A High Power Switch Actuator adopts 50A magnetic latching relay, which has three types of output circuits, and each channel outputs 16A current.
KNX 8CH 16A High Power Switch Actuator
SPECS

16A High Power Switch Actuator includes 3 types: 4, 8 and 12 channels of actuator

Maximum output current of each channel: 16A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output
This series of High Power Actuators have the characteristics of long life, low power consumption and fast execution speed.

KNX 8CH 16A High Power Switch Actuator
With Current Detection
HDL-M/R8.16.1-CD
KNX 16A High Power Switch Actuator with Current Detection adopts 50A magnetic latching relay, which has three types of output circuits, and each channel outputs 16A current.
KNX 8CH 16A High Power Switch Actuator
SPECS

16A High Power Switch Actuators with Current Detection include 3 types: 4, 8 and 12 channels of actuator

Maximum output current of each channel: 16A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output

Current detection functions

This series of High Power Actuators have the characteristics of long life, low power consumption and fast execution speed.

KNX 12CH 10A High Power Switch Actuator
HDL-M/R12.10.1
KNX 10A High Power Switch Actuator includes 3 types of output circuits, and each channel outputs 10A current.
KNX 12CH 10A High Power Switch Actuator
SPECS

10A High Power Switch Actuators include 3 types: 4, 8 and 12 channels of actuator

Maximum output current of each channel: 10A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output
With characteristics of long life, low power consumption and fast execution speed,
this series of actuators are in full compliance with European KNX safety standards and protocols of high-power switching.

KNX 12CH 16A High Power Switch Actuator
HDL-M/R12.16.1
KNX 16A High Power Switch Actuator adopts 50A magnetic latching relay, which has three types of output circuits, and each channel outputs 16A current.
KNX 12CH 16A High Power Switch Actuator
SPECS

16A High Power Switch Actuator includes 3 types: 4, 8 and 12 channels of actuator

Maximum output current of each channel: 16A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output
This series of High Power Actuators have the characteristics of long life, low power consumption and fast execution speed.

KNX 12CH 16A High Power Switch Actuator
With Current Detection
HDL-M/R12.16.1-CD
NX 16A High Power Switch Actuator with Current Detection adopts 50A magnetic latching relay, which has three types of output circuits, and each channel outputs 16A current.
KNX 12CH 16A High Power Switch Actuator
SPECS

16A High Power Switch Actuators with Current Detection include 3 types: 4, 8 and 12 channels of actuator

Maximum output current of each channel: 16A

Multiple control functions

Logic function: AND, OR, XOR

Heating function: PWM(1bit/1byte) control output

Current detection functions
This series of High Power Actuators have the characteristics of long life, low power consumption and fast execution speed.

Back to content