Dimming Actuators - Pro-AIT

Search
Go to content

Main menu:

Dimming Actuators

6 x 1A – Universal Dimmer (Trailing and Leading Edge) - MDT0601.433

6 x 1A – Universal Dimmer (Trailing and Leading Edge) - MDT0601.433

Product Description

The HDL-MDT0601.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

Different load Types

Both leading and trailing edge modes are available. The leading edge supports both Inductive loads and resistive loads, while the trailing edge supports capacitive loads and resistive loads. This enables the operation of incandescent bulbs, motors, and dimmable LED lamps.

Selectable Dimming Curves

With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Protection

To prevent damage to the system and unit a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

Manual control

With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

4 x 1.5A Universal Dimmer, (Trailing and Leading Edge) - MDT04015.433

4 x 1.5A Universal Dimmer, (Trailing and Leading Edge) - MDT04015.433

Product Description

The HDL-MDT04015.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate system changes are possible via on-board manual buttons.

Different load Types

Both leading and trailing edge modes are available. The leading edge supports both Inductive loads and resistive loads, while the trailing edge supports capacitive loads and resistive loads. This enables the operation of incandescent bulbs, motors, and dimmable LED lamps.

Selectable Dimming Curves

With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Protection

To prevent damage to the system and unit a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

Manual control

With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

2 x 3A Universal Dimmer (Trailing and Leading Edge) - MDT0203.433

2 x 3A Universal Dimmer (Trailing and Leading Edge) - MDT0203.433

Product Description

The HDL-MDT0203.433 is a MOSFET dimmer which supports leading edge and trailing edge dimming. Four selectable dimming curves are available, and the module is able to control inductive, resistive, and capacitive loads. Immediate controlling is possible via on-board manual buttons.

Different load Types

Both leading and trailing edge modes are available. The leading edge supports both Inductive loads and resistive loads, while the trailing edge supports capacitive loads and resistive loads. This enables the operation of incandescent bulbs, motors, and dimmable LED lamps.

Selectable Dimming Curves

With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Protection

To prevent damage to the system and unit a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

Manual control

With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to adjust and switch the dimming controller on & off.

Leading Edge TRIAC 6CH 2A Dimmer - MD0602.432

Leading Edge TRIAC 6CH 2A Dimmer - MD0602.432

Product Description

The MD0602.432 supports leading edge TRIAC dimming, and has four selectable dimming curves. Both inductive and resistive loads can be controlled, as can capacitive loads like LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Immediate controlling is possible via six on-board manual buttons.

Leading edge dimming

The MD0602.432 is able to support incandescent lights, halogen lights, and dimmable LED lights. Practically any leading edge dimming load is supported. This enables users to employ their preferred lighting system, and completely control every aspect of their lighting solution.

Selectable Dimming Curves

With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Fuse

The system uses replaceable fuses to protect against the short circuiting of loads, and accidental over load. LED status indicators are also able to pinpoint where any short circuits occur, this facilitates swift repairs and easy maintenance.

Protection

To prevent damage to the system and module a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

Manual control

With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to switch the dimming controller on & off.

Leading Edge TRIAC 4CH 5A Dimmer - MD0405.433.

Leading Edge TRIAC 4CH 5A Dimmer - MD0405.433.

Product Description

The MD0405.433 supports leading edge TRIAC dimming, and has four selectable dimming curves. Both inductive and resistive loads can be controlled, as can capacitive loads like LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Immediate controlling is possible via four on-board manual buttons.

Leading edge dimming

The MD0405.433 is able to support incandescent lights, halogen lights, and dimmable LED lights. Practically any leading edge dimming load is supported. This enables users to employ their preferred lighting system, and completely control every aspect of their lighting solution.

Selectable Dimming Curves

With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Protection

To prevent damage to the system and module, a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

Manual control

With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to switch the dimming controller on & off.

Leading Edge TRIAC 4CH 3A Dimmer - MD0403.432.

Leading Edge TRIAC 4CH 3A Dimmer - MD0403.432.

Product Description

The MD0403.432 supports leading edge TRIAC dimming, and has four selectable dimming curves. Both inductive and resistive loads can be controlled, as can capacitive loads like LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Immediate controlling is possible via four on-board manual buttons.

Different load Types

Both inductive loads and resistive loads are supported; this means incandescent bulbs and motors can work simultaneously. Some capacitive loads can work in combination with the constant current module. Energy saving lamps, and non-dimmable lamps are not supported however. The minimum system load is 40w.

Selectable Dimming Curves

With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Fuse

The system uses replaceable fuses to protect against the short circuiting of loads, and accidental over load. LED status indicators are also able to pinpoint where any short circuits occur, this facilitates swift repairs and easy maintenance.

Protection

To prevent damage to the system and module a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

Manual Control

With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to switch the dimming controller on & off.

Leading Edge TRIAC 2CH 6A Dimmer - MD0206.432

Leading Edge TRIAC 2CH 6A Dimmer - MD0206.432

Product Description

The MD0206 supports leading edge TRIAC dimming, and has four selectable dimming curves. Both inductive and resistive loads can be controlled, as can capacitive loads like LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Immediate controlling is possible via two on-board manual buttons.

Different load Types

The MD0206.432 is able to support incandescent lights, halogen lights, and dimmable LED lights. Practically any leading edge dimming load is supported. This enables users to employ their preferred lighting system, and completely control every aspect of their lighting solution.

Selectable Dimming Curves

With 4 different dimming curves, and a dimming accuracy of 512 steps, the dimming actuator operates smoothly giving total control to the end user.

Fuse

The system uses replaceable fuses to protect against the short circuiting of loads, and accidental over load. LED status indicators are also able to pinpoint where any short circuits occur, this facilitates swift repairs and easy maintenance.

Protection

To prevent damage to the system and unit a variety of protective features are included. With an over heat sink, electronic short circuit protection, internal overheat protection, and overload protection, safety is guaranteed.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when powered on again. This gives the user a system that remembers their previous scene, and requires no further control.

Manual Control

With the ability to bypass the main control interface, and manually control each channel, this unit gives an end user the ability to switch the dimming controller on & off.

2 x 10A Power Amplifier Dimmer - SB-WL-B0210.

2 x 10A Power Amplifier Dimmer - SB-WL-B0210.

Product Description

This SB-WL-B0210 is a high powered Leading Edge TRIAC dimmer. Dual inputs are supported, and the modules input voltage is AC 0-240V.

Dual control inputs

The unit has two control input voltages, the first being 0-240 volts AC supplied by a lower ampere dimmer, and the second being the 0-10 volts DC control signal.

Dual channels

Two channels enable the module to support two different dimmers. Each channel can output 10A, this gives a user unparalleled flexibility in the control of their lighting solutions.

Status Indication

LED indication of both the dimming status and the power supply status allow a user to immediately know if the device is operating. This aids system integration and troubleshooting immensely.

Protected

Dual side vents ensure that the device dissipates heat effectively. This helps to safeguard against overheating, guaranteeing a long trouble free service life.

1 x 20A Power Amplifier Dimmer - SB-WL-B0120

1 x 20A Power Amplifier Dimmer - SB-WL-B0120

Product Description

The SB-WL-B0120 is a high powered Leading Edge TRIAC dimmer. The output current from the SB-WL-B0120 is 20A, and dual inputs are supported.

Dual control inputs

The unit has two control input voltages, the first being 0-240 volts AC supplied by a lower ampere dimmer, and the second being the 0-10 volts DC control signal.

Status Indication

LED indication of both the dimming status and the power supply status allow a user to immediately know if the device is operating. This aids system integration and troubleshooting immensely.

Protected

Dual side vents ensure that the device dissipates heat effectively. This helps to safeguard against overheating, guaranteeing a long trouble free service life.

6 x 20A dimmer, Leading Edge - SB-WL-D0620.

6 x 20A dimmer, Leading Edge - SB-WL-D0620.

Product Description

The SB-WL-D0620 is a high performance 6 channel TRIAC dimmer, capable of supplying 20A per channel.The module is able to act as a scene controller, and control lights that demand a high current.

High performance TRIAC dimmer

With 6 available channels and a maximum current output per channel of 20A the SB-WL-D0620 can meet a variety of load demands. Each channel can have low, high, and maximum thresholds with a 10 bit dimming accuracy. This ensures stable graduated dimming.

Different load types

Resistive loads, inductive loads, LED drivers, and electronic ballasts which utilize leading edge TRIAC dimming are supported. This means that users can control incandescent lights, halogen lights, and dimmable LED lamps with a single dimming module. If a lamp is not dimmable then it can still be powered on and off.

LED status indication

The status of the CPU is shown via three triple phase LED indicators. These indicators are able to show the power status of phases A, B, and C. The channel output signal status is also represented, by 6 LED indicators.

Protected

Protection is of paramount importance in any HDL module. To safeguard the module and the system it is incorporated into short-circuit protection, an over heat sink, ground protection, overload protection, and over heat protection have been included as standard.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when it is powered on again. This gives the user a system that remembers their settings, and requires no further control.

6 x 10A dimmer, Leading Edge - SB-WL-D0610

6 x 10A dimmer, Leading Edge - SB-WL-D0610

Product Description

The SB-WL-D0610 is a high performance 6 channel TRIAC dimmer, capable of supplying 10A per channel.The module is able to act as a scene controller, and control lights that demand a high current.



High performance TRIAC dimmer

With 6 available channels and a maximum current output per channel of 10A, the SB-WL-D0610 can meet a variety of load demands. Each channel can have low, high, and maximum thresholds with a 10 bit dimming accuracy. This ensures stable and graduated dimming.

Different load types

Resistive loads, inductive loads, LED drivers, and electronic ballasts which utilize leading edge TRIAC dimming are supported. This means that users can control incandescent lights, halogen lights, and dimmable LED lamps with a single dimming module. If a lamp is not dimmable then it can still be powered on and off.

LED status indication

The status of the CPU is shown via three triple phase LED indicators. These indicators are able to show the power status of phases A, B, and C. The channel output signal status is also represented, by 6 LED indicators.

Protected

Protection is of paramount importance in any HDL module. To safeguard the module and the system it is incorporated into short-circuit protection, an over heat sink, ground protection, overload protection, and over heat protection have been included as standard.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when it is powered on again. This gives the user a system that remembers their settings, and requires no further control.

12 x 10A dimmer, Leading Edge - SB-WL-D1210

12 x 10A dimmer, Leading Edge - SB-WL-D1210

Product Description

The SB-WL-D1210 is a high performance 12 channel TRIAC dimmer, capable of supplying 10A per channel. The module is able to act as a scene controller, and control lights that demand a high current.

High performance TRIAC dimmer

With 12 available channels and a maximum current output per channel of 10A the SB-WL-D1210 can meet a variety of load demands. Each channel can have low, high, and maximum thresholds with a 10 bit dimming accuracy. This ensures stable and graduated dimming.

Different load type

Resistive loads, inductive loads and LED driver, electronic ballast which support leading edge TRIAC dimming are supported. This means that users can control incandescent lights, halogen lights, and dimmable LED lamps with a single dimming module. If a lamp is not dimmable then it can still be powered on and off.

LED status indication

The status of the CPU is shown via three triple phase LED indicators. These indicators are able to show the power status of phases A, B, and C. The channel output signal status is also represented, by 12 LED indicators.

Protected

Protection is of paramount importance in any HDL module. To safeguard the module and the system it is incorporated into short-circuit protection, an over heat sink, ground protection, overload protection, and over heat protection have been included as standard.

Scene Recovery

When the dimmer has been powered off, it is able to automatically restore the last scene used when it is powered on again. This gives the user a system that remembers their settings, and requires no further control.

TRIAC Constant Current Load - HDL-MCR01.40.

TRIAC Constant Current Load - HDL-MCR01.40.

Product Description

As a support to the TRIAC dimmer, the HDL-MCR01.40 is able to provide a single channel output with a constant current. The module makes the connection of lamps in parallel possible, and ensures the current provided is stable.

Flicker elimination

The module is able eliminate the flickering that occurs when lamps are dimmed by a TRIAC dimmer. Working in conjunction with a TRIAC dimmer it enables the seamless dimming of lamps, LEDs, and electronic transformers.

Easy installation

As the module has no positive terminal or negative terminal, a user is able to install the module simply and easily. As it is practically impossible to install the module incorrectly, even an inexperienced user can complete the installation.

 
Copyright 2015. All rights reserved.
Back to content | Back to main menu