GATEWAYS/SYSTEM DEVICES_KNX - Pro-AIT

Go to content
GATEWAYS / SYSTEM DEVICES

KNX IP Router
HDL-M/IPRT.1
KNX net/IP Router enables data exchange between KNX net/IP line and TP1 bus, and data download and data monitoring are available via ETS software.
KNX IP Router
SPECS

Fast data caching, reliable data delivery and validation

Fast telegram data exchange between KNX net/IP and KNX TP1 bus through LAN network

Up to 4 channels for data debugging and monitoring for ETS or monitoring devices

6 dual-color LED lights indicate all communication status

Function key can temporarily stop data filtering, and data filtering will restore automatically when reaches the preset time.

KNX Line Coupler
HDL-M/LCR.1
KNX Line Coupler can be used as a line coupler or repeater (for address extension), which can be connected to a main line and a sub line when the device works as a line coupler.
KNX Line Coupler
SPECS

The coupler is connected to KNX zone/line to enable zone/line isolation

The device can be used as a line coupler or repeater

6 LEDs display data transmission status

1 LED for programming status display
Through the line coupler, packet filtering can be carried out between the two lines, reducing the amount of telegrams, preventing interference, and maintaining efficient communication.

KNX 960mA Power Supply Module
HDL-M/P960.1
KNX 960mA Power Supply Module is fully compliant with European safety standards and KNX standard protocol.
KNX 960mA Power Supply Module
SPECS

Provides maximum current 960mA to KNX/EIB bus

Overload protection and over current protection

Output short circuit protection

Keep pressing the RESET button for 2 seconds to reset the device
It can provide up to 960mA current to KNX/EIB bus.

KNX Master/Slave Timer Controller
HDL-M/TM04.1
With 4 independent channels and real-time clock, KNX Master/Slave Timer Controller is capable of running standard time as the master clock or slave clock.
KNX Master/Slave Timer Controller
SPECS

Multiple routine modes

Multiple control target types

Scene recall function

Working modes: Master /slave mode
The master clock sends the clock information cyclically to KNX/EIB bus to control the schedule,
while the slave clock achieves synchronization after receiving the master clock information and also realizes the control of schedule.

KNX USB Interface
HDL-M/USB.1
KNX USB Interface is a KNX system device with a USB interface that establishes bidirectional data transfer between the computer and the KNX Bus.
KNX USB Interface
SPECS

Supports KNX address management

Supports application parameter management

Supports KNX Bus device diagnostics

Connects PC and KNX devices to enable KNX device programming through PC

Supports telegrams with maximum 228 bytes length
he KNX USB Interface supports operations, for example, KNX address management, application parameter management, and KNX Bus device diagnostics.
The device is used in conjunction with ETS and standard KNX software.

KNX 17CH Mix Actuator
HDL-M/MHR17U.1
KNX 17CH Mix Actuator is used for controlling relays, dimmers, curtains and air conditioners. The actuator supports 17CH control channels.
KNX 17CH Mix Actuator
SPECS

Supports 17CH relay control channels

CH1-6 and 12-17 are TV8 5A relays

CH7-11 are magnetic latching relays with an operating current of 10A
The 17 relay control channels can be connected to loads, for example, incandescent lamps, halogen lamps, and LED lamps, etc.
They can be used for fan speed control or mode control of airconditioning, and curtain control (supporting inching control).

KNX 19CH Mix Actuator
HDL-M/MHRD02R17U.1
KNX 19CH Mix Actuator is used for controlling relays, dimmers, curtains and air conditioners. The actuator supports 19CH control channels.
KNX 19CH Mix Actuator
SPECS

Supports 19CH control channels

17 relay channels, 2 MOSFET dimming channels

Multiple dimming controls
The 17 relay control channels can be connected to loads, for example, incandescent lamps, halogen lamps, and LED lamps, etc.
2 MOSFET dimming channels with working current of 1A, can be used for trailing edge dimming of lamps (incandescent lamps, lowvoltage halogen lamps, dimmable LED lamps, etc.).

KNX CoolBox VRV Gateway
HDL-M/CBVRV.GW.1
KNX CoolBox VRV Gateway is a central air conditioning all-in-one control gateway based on KNX communication.
KNX CoolBox VRV Gateway
SPECS

Search KNX CoolBox VRV Gateway to view online/offline status of each indoor unit

Easy configuration of air conditioner internal machine

Control up to 64 indoor units

Can monitor up to 64 indoor units

Air conditioning working modes: standard and custom

Upgrade the firmware online
The gateway supports air conditioners of most major brands : Daikin, Hitachi, Toshiba, Midea, Gree, etc.

Back to content