The MLED0605.432 is a 6 channel 5A LED dimming module. With 6 channels it is able to provide a constant voltage that can control the light intensity of LED’s. All of the 6 channels have 12 scenes, 4 running modes, and a manual bypass button.
With 6 channels a multitude of LED lights can be controlled and managed, this gives a user complete control over their lighting solutions, and enables vast customization opportunities.
Pulse wave modulation
Pulse wave modulation ensures that the current output to devices is at a constant voltage. This constant voltage ensures that any device connected to the MLED0605.432 has a maximized life expectancy, and operates faultlessly.
Built in driver
The built in LED driver allows users to do away with external LED drivers that take up valuable space in the distribution box. Not only does this solution save space, but it guarantees that the driver is compatible with the Buspro system.
Manual switching control
The MLED0605.432 features on-board buttons that enable the onsite switching of lights, or dimming control adjustment. This enables a user to take instant effective control of the system, without resorting to a PC.
System protection is crucial to HDL, and the MLED0605.432 features both short circuit protection, and over current protection. This ensures the safety of not only the unit, but the system as a whole.
The SB-LED650MA is a dedicated LED driver, which uses a DMX512 interface. The module uses pulse wave modulation to supply a constant voltage to color changing LED strips, and requires DC 10-30V to operate.
Pulse wave modulation is able to support common anode RGB LED strips and enables them to change color or be dimmed. The constant voltage supplied ensures a long hassle free service life for any device connected to the SB-LED650MA.
The ability to process and buffer the DMX 512 signal gives amazing flexibility to users, allowing them to maintain exceptional signal strength over long distances.
With LED indication showing correct functioning of the DMX, and R, G, B, users have peace of mind that their system is working optimally.
DMX address setting
The addresses for DMX devices can be set via the three dials on the front of the SB-LED650MA. In addition to this users can perform on the spot testing of their DMX addresses to ensure the correct operation of all devices.
Three DMX terminals are present on the front of the unit, they allow the input of data+, data-, and com. The DMX output signal can also be buffered to another LED driver if required.